Stainless Steel Varroa Mesh

[XYZ]

Hi everyone,

I bought this mesh from ebay http://www.ebay.co.uk/itm/293213851803
It's really strong but with 4mm apertures it looks a bit big for varroa mesh.

What are the thoughts on this? Will it do as varroa mesh for the tunnel entrance floors I have made?

 

[Murox]

I think its usual to have 2.47mm square holes/mesh as the optimum size - prevents most things from entering/exiting but allows mites to fall through. What can go through 4mm square holes ?

 

[ericbeaumont]

Wax moth.

 

[XYZ]

Wax moth.

Can wax moth not get through normal varroa mesh?

Ah man :-(

 

[Beefriendly]

Can wax moth not get through normal varroa mesh?

Ah man :-(

Wax moth usually enter by the front entrance and I think even the lesser wax moth at 1/2inch long would struggle to get through a 4mm mesh hole.

 

[Swarm]

Hi everyone,

I bought this mesh from ebay http://www.ebay.co.uk/itm/293213851803
It's really strong but with 4mm apertures it looks a bit big for varroa mesh.

What are the thoughts on this? Will it do as varroa mesh for the tunnel entrance floors I have made?

The expanded type that thornes sell will allow certain Wasps to gain entry, believe it or not. I once stored some frames in a box over a sealed floor, only to find loads of them in there when I opened it. Because of that I would be wary of 4mm mesh.

 

[XYZ]

OK guys thanks for that. Which of these two would you go for?

https://www.ebay.co.uk/itm/Heavy-Du...Woven-Wire-Mesh/293213880711?var=592082241383

https://www.ebay.co.uk/itm/Heavy-Du...Woven-Wire-Mesh/293213883506?var=592082247437

I had a quick look online and found the largest varroa dimension to be 1.2mm. Is there any reason why I should avoid the 1.98mm mesh?

 

[Millet]

OK guys thanks for that. Which of these two would you go for?

https://www.ebay.co.uk/itm/Heavy-Du...Woven-Wire-Mesh/293213880711?var=592082241383

https://www.ebay.co.uk/itm/Heavy-Du...Woven-Wire-Mesh/293213883506?var=592082247437

I had a quick look online and found the largest varroa dimension to be 1.2mm. Is there any reason why I should avoid the 1.98mm mesh?

I use 2.5mm on all my homemade floors with no issues so i think that top link at 2.47mm should do the trick..as previously mentioned i would be worried about wasps sneaking in..bees can get through a 4.5mm gap and some of those worker wasps are a bit slimmer than a bee.

 

[ericbeaumont]

Wax moth usually enter by the front entrance and I think even the lesser wax moth at 1/2inch long would struggle to get through a 4mm mesh hole.

Wax moth larvae.

 

[hemo]

4mm certainly wasps as not all nests have the same size residents, last year I had nest in a compo bin and the little buggers were well little. I had three hives within 8 ft of them but no bother at all.

Look for 8 mesh size.